How to Perform eSIM Testing: Steps, Scenarios, and Automation Approach

esim testing

Summarize this blog post with:

What happens when an eSIM profile installs successfully, but the device still cannot register on the right network or establish the services the subscriber expects?

That’s why eSIM testing has to cover more than the activation screen. You need to validate profile provisioning and management, device behavior, network registration, connectivity, recovery, and the application experience around them.

GSMA Intelligence reported global eSIM smartphone penetration at 5% at the end of 2025 and expects it to reach 10% by the end of 2026.

As adoption expands across consumer and IoT devices, QA teams need repeatable ways to validate more combinations without losing visibility into where failures occur.

This guide explains how to test eSIM workflows, the scenarios that matter most, and where automation can help you scale coverage.

Test eSIM-enabled apps with TestGrid. Request a free trial.

TL;DR

  • eSIM testing involves assessing how eSIM apps and software systems handle subscription purchases, profile management, activation workflows, and network connectivity
  • The areas you should test include profile download and installation, state management, activation and deactivation of profiles, data session management, roaming, and error handling
  • How to test eSIM functionality: Outline test scope, set up physical devices, configure eSIM profiles, activate the profiles, run tests, analyze results
  • Provisioning failures, device compatibility issues, network variability, intermittent errors, and the difficulty of scaling test coverage are some challenges of eSIM testing
  • You can address the challenges with real-device testing, standardized test configurations, automated regression testing, and detailed diagnostics

What Is eSIM Testing and Why Is It Important?

eSIM testing is the process of evaluating the quality, reliability, security, and interoperability of eSIM-enabled devices, applications, provisioning systems, and mobile services

It helps you verify that the device, eUICC, provisioning infrastructure, and mobile network work correctly across the eSIM lifecycle. Here, you check if the eSIM can download, install, enable, and connect to a mobile network properly.

eSIM testing is critical because it helps you:

  • Prevent provisioning errors which can disrupt subscription activation and profile management
  • Maintain uninterrupted mobile connectivity across operators and network technologies
  • Validate compatibility with international roaming partners and regional network configurations
  • Protect subscriber credentials and stop unauthorized access to eSIM profiles
  • Identify device-specific and network-related defects before they affect your end users
  • Reduce post-deployment troubleshooting by identifying where failures originate from, whether it’s the device, profile, provisioning infrastructure, or mobile network

Also Read: Simplify Telecom Testing Across Devices, Networks, and Regions

Key eSIM Testing Challenges

1. eSIM profile download, installation, and activation failures

eSIM provisioning can fail because of invalid or expired activation codes, connectivity issues with the SM-DP+ server, incompatible devices, or insufficient eUICC storage. Interrupted downloads, certificate errors, and profile restrictions might also stop your users from successfully installing or activating their eSIMs.

2. Device and eUICC compatibility

The eSIM’s functionality may vary across different device manufacturers, hardware configurations, and operating system versions. Problems like incompatible provisioning capabilities, unsupported network technologies, or differences in LPA implementations can cause profile activation and management failures.

3. Data, SMS, and voice service validation across networks

Your eSIM may register successfully but experience service failures from incorrect APN settings, operator configurations, or roaming restrictions. Network registration doesn’t guarantee that mobile services will work. So, your users may experience data session failures, slow or unstable mobile data, delayed or undelivered SMS messages, or call drops.

4. Reproducing and diagnosing intermittent eSIM failures

Intermittent eSIM failures can be hard to reproduce because they depend on fluctuating network coverage, roaming conditions, device state, or provisioning delays. Your testers have to correlate device logs, network registration events, signal metrics, and timestamps to find the root cause.

5. Scaling eSIM testing across devices, profiles, and geographies

eSIM performance can be different across multiple device models, eSIM profiles, operators, and countries. However, testing across these combinations can create a large number of test combinations. Moreover, if you perform tests manually, it can limit coverage and repeatability.

How you can overcome these challenges

You can navigate these by conducting real-device testing, automated test execution, and controlled network environments. You can maintain a diverse device and eSIM profile inventory, standardize test configurations, and capture detailed device and network logs.

This will enable you to improve test coverage, reproduce intermittent failures, and detect compatibility or connectivity issues. And performing regular regression testing might help you maintain consistency across releases.

Also Read: Mobile App Testing: Types, Process, and Best Practices

What Should You Test in an eSIM Testing Process?

1. Profile download and installation

One of the most important aspects is to ensure that the device can securely retrieve the correct operator profile from the SM-DP+ server and that the eUICC can successfully install it. You must check profile integrity, authentication, download authorization, and handling of interrupted transactions to avoid unauthorized profiles being installed.

2. State management

Check which profiles are installed and whether each profile is enabled or disabled. Then verify the operations that change the profile lifecycle, including download and installation, enablement, disablement, deletion, reboot, and profile switching.

GSMA distinguishes installed-profile states such as Enabled/Disabled from profile-management operations.

3. Activation and deactivation

You should verify the complete eSIM activation flow: profile download and installation, enablement, network registration, and service availability. When a profile is disabled, confirm that the device can no longer use that subscription until it is enabled again.

4. Error handling and recovery

See how the device and provisioning system is responding to failures such as rejected profile operations, authentication errors, server timeouts, and interrupted transactions.

You need to ensure the eSIM provisioning system is returning appropriate error codes, safely handling incomplete operations, and checking existing profile state before retrying installation to prevent duplicate operations.

5. Security and authorization

Include negative eSIM testing scenarios for invalid or expired activation codes, unauthorized profile operations, certificate or authentication failures, and interrupted provisioning requests.

Verify that failed operations leave the profile in a valid state and that sensitive subscription or profile information is not exposed through the application, logs, or error messages.

Functional eSIM testing should also be kept separate from formal GSMA conformance testing, which uses dedicated consumer and IoT test specifications.

6. Data, SMS, and voice service validation

A profile can be enabled and registered on the network while individual services still fail. Test mobile-data sessions, DNS and required network requests, SMS delivery, and voice calling where supported. Include APN configuration, reconnection after network loss, and service recovery after a device restart or profile switch.

7. Roaming and interoperability

You must ensure that the eSIM profile works on its home network and across the roaming partner networks and technologies supported by the subscription. Check operator selection, roaming authorization, network registration, and service continuity.

Learn More: Testing Mobile Apps on Different Networks and Carriers

How to Perform eSIM Testing

1. Define the test scope and requirements

You should start with identifying the use cases, supported devices, operating systems, mobile operators, and network technologies which you want to validate.

Then determine whether you are testing a consumer eSIM deployment based on the GSMA SGP.22 architecture or an IoT deployment based on SGP.32.

The workflows differ: consumer devices commonly use an LPA for profile management, while the IoT architecture supports remote provisioning and management for network- or UI-constrained devices.

2. Set up your devices and test infrastructure

Next, you have to prepare the devices where your tests will execute. Make sure you configure eSIM-compatible physical devices and cover manufacturers, OS versions, and eUICC configurations that users mostly use.

Then obtain authorized eSIM test profiles, QR codes, and activation credentials from operators or provisioning providers and set up the required network connectivity, test environment, and diagnostic tools so you can capture device logs during execution.

3. Configure the eSIM profiles

Prepare your test profiles with the appropriate operator credentials, subscription parameters, and network configurations.

Confirm that each authorized eSIM test profile contains the expected subscription identifiers, operator configuration, policy settings, and network parameters for the scenario you’re testing.

For realistic and accurate testing, set different profile types and policy rules to assess device behavior under diverse subscription and network conditions.

4. Do profile provisioning and activation

For consumer eSIM testing, initiate profile provisioning through the device’s LPA using the supported mechanism, such as a QR code, activation code, or profile-discovery flow. IoT deployments based on SGP.32 use a different remote-provisioning architecture, so follow the applicable IoT provisioning workflow for those devices.

5. Run functional, network, and end-to-end tests

After your profile is active and network registration is done, execute the critical tests which include:

  • Functional tests to verify profile management and device behavior
  • Network tests covering operator registration, data sessions, DNS, SMS, and voice services
  • End-to-end testing so you can examine the complete journey from profile provisioning to successful service usage across supported networks and roaming partners

After execution, analyze your test results. For this, you can review execution logs, API responses, and network traces. This will allow you to isolate the source of failures and assess if they resulted from issues associated with your app, provisioning service, or network.

6. Automate the repetitive tests

Lastly, automate repeatable scenarios where the required controls are exposed to your mobile, API, or test-automation frameworks. These can include account setup, activation UI flows, profile-management interfaces, API checks, connectivity validation, and regression scenarios.

Running automated regression tests after app, firmware, or provisioning system updates enables you to ensure the existing eSIM functionality is intact.

Also Read: Network Performance Testing: A Guide for QA & SRE Teams

Manual vs. Automated eSIM Testing

Manual and automated testing have different purposes in an eSIM testing strategy. The table below shows the differences between the two so you can pick the right approach based on your test requirements, infrastructure, and operational needs.

FactorsManual eSIM testingAutomated eSIM testing
Test executionYou manually perform provisioning, profile management, and connectivity checksScripts and testing platforms execute predefined test scenarios automatically
Execution timeTakes longer, particularly when you’re testing multiple profiles, devices, and networksExecutes repetitive tests faster, and in parallel execution
Test coverageGenerally, it’s limited to a smaller number of devices, profiles, and locationsGives you better coverage across multiple device configurations, profiles, and network environments
RepeatabilityResults may depend on tester actions and test conditionsEnables you to reuse standardized scripts and configurations for consistent execution
Failure analysisManual observation, screenshots, and tester-recorded notesAutomated execution logs, error codes, network events, and diagnostic data
MonitoringMonitoring depends on manual checks done by testers; changes can be tough to track over timeYou can schedule tests at regular intervals, with automated alerts or failure reports

How TestGrid Can Help Simplify eSIM Testing

For proper testing of eSIM functionality, you need to check carrier-dependent behavior, network interruptions, and app performance on different devices.

Built by TestGrid, TestGrid ONE is the AI operating system that runs quality engineering. It helps you streamline eSIM testing workflows with real device execution and AI-native mobile automation.

You can easily build automated tests using codeless authoring or existing Appium, Espresso, and XCUITest frameworks, then execute them across multiple Android and iOS devices.

The platform supports integrations with CI/CD tools like Jenkins, GitHub Actions, and Azure DevOps, which allows testers to run automated test runs as part of their development pipelines.

With TestGrid, you can automate application and API workflows around eSIM onboarding, including account setup, activation screens, profile-management interfaces exposed by the application, and network-dependent requests.

Execute those workflows on supported real Android and iOS devices and capture screenshots, video, logs, and network evidence when failures occur. This keeps the claim within TestGrid’s substantiated device, app, API, and diagnostic capabilities. 

TestGrid also captures real-time mobile performance metrics, like CPU utilization, memory consumption, battery impact, network activity, and UI response time.

This lets your QA team assess the eSIM mobile app’s behavior in prolonged network activity, repeated connectivity changes, and resource-intensive scenarios.

Final Thoughts

eSIM adoption is increasing across consumer devices and IoT deployments; therefore, your testing strategy will also need to account for complex provisioning and connectivity scenarios.

Automation can help you repeat application, API, connectivity, and regression checks across supported environments, while detailed execution evidence helps your team investigate where failures occurred.

As your test matrix grows, AI-assisted workflows can support test generation, execution, failure investigation, and regression selection while keeping human review part of the process. This can make eSIM testing more adaptive and reduce manual investigation when deployments scale.

To start testing eSIM-enabled apps across mobile devices and IoT environments using AI-native capabilities, request a free trial with TestGrid.

Frequently Asked Questions (FAQs)

What are the most common eSIM testing scenarios?

Common eSIM testing scenarios include profile download and installation, eSIM activation testing, enablement and disablement, profile switching and deletion, network registration, data connectivity, SMS and voice services, roaming, interrupted provisioning, and error recovery. Your exact coverage should reflect the devices, operators, profiles, and services you support.

How do you test eSIM activation using a QR code?

For an eSIM test with a QR code, use an authorized test profile and scan the code through the supported consumer-device activation flow. Verify that the device reaches the correct provisioning service, downloads and installs the expected profile, enables it successfully, registers on the network, and provides the required services.

Why is real-device testing important for eSIM?

eSIM behavior depends on device hardware, the eUICC, operating system, profile-management implementation, and network environment. Real-device eSIM testing lets you observe those dependencies directly and catch compatibility, connectivity, and recovery issues that application-only or simulated testing may not reproduce.

Can eSIM testing be automated?

Yes, but the scope of eSIM test automation depends on which controls your devices, applications, APIs, operators, and provisioning systems expose. Automated eSIM testing can cover repeatable application flows, API validation, connectivity checks, regression scenarios, and supported profile-management interactions, while some carrier- or device-controlled operations may still require specialized access or manual validation.

How does TestGrid simplify the transition from manual to automated eSIM testing?

TestGrid lets you move repeatable eSIM-enabled application workflows into automation using codeless authoring or supported frameworks such as Appium, Espresso, and XCUITest. You can execute those tests on supported real Android and iOS devices, trigger eSIM automation testing through CI/CD workflows, and review screenshots, video, logs, network evidence, and device metrics when a test fails.